beaver river bridge replacement project

PHOTOS: Beaver River Bridge Replacement Project Is More Than Halfway Complete

Significant progress has been made along the Pennsylvania Turnpike (PA Turnpike) as the Beaver River Bridge Replacement Project is more than halfway completed. The $269 million project, which began in December 2022, constructs two new bridges to the north of the current bridge and expands the roadway from two to three lanes in each direction, adding widened shoulders and median. Pier tables are currently under construction on the eastbound bridge and have been completed on the westbound side. Each bridge is a five-span, cast-in-place, segmental bridge that is 1,645 feet long and 200 feet high. The westbound bridge structure is…


PHOTOS: PA Turnpike Beaver River Project Continues Into Its Next Stage

People in the area will see some piers and beams are in place as the project continues into its next stage. The project is currently in stage four of the eight project stages. Turnpike travel lanes have been shifted southward to accommodate construction activities for the new bridge and roadway alignment. The contractor has completed some of the piers for the new westbound Beaver River bridge crossing. New bridge construction over Big Beaver Boulevard (PA Route 18) at the Beaver Valley interchange continues with precast concrete beams recently having been set on the superstructure and bridge deck construction will follow…


PHOTOS: PA Turnpike Continues Progress Thru Stage 3 Of Beaver River Bridge Replacement Project

Those who drive near the Beaver River Bridge Replacement Project are beginning to notice that construction of the new bridge over the Beaver River is now underway. The contractor is currently constructing new abutment footings and drilled shafts, pier footings and columns. Additionally, earthwork and drainage work continues to allow for the wider road and the new interchange ramps being constructed. Accordingly, Turnpike travel lanes have been shifted southward to accommodate the new bridge and roadway construction. Also, a temporary ramp configuration has been established since November impacting eastbound traffic going on and off the Pennsylvania Turnpike (Interstate 76) and…


TRAVEL ADVISORY: PA Turnpike Beaver Valley Interchange Eastbound Exit to Temporarily Close

BEAVER COUNTY —Travelers are advised that construction crews will be temporarily closing the eastbound exit at the Beaver Valley Interchange (Exit 13) of the Pennsylvania Turnpike (Interstate 76) this coming weekend. The exit ramp will be closed, weather permitting, starting at 9:00 p.m. on Saturday, Nov. 4, until 9:00 p.m. Sunday, Nov. 5. The closure is necessary to allow for the construction of a temporary on and off-ramp so work can continue as part of the ongoing Beaver River Bridge Replacement Project. Make-up dates will be November 11-12, 2023 (same start/end times) in the event of inclement weather. During the…


PA TURNPIKE: Total Reconstruction Project Underway Near Ellwood City Exit

For many Ellwoodians who use the convenience of the nearby PA Turnpike for travel, there is an extensive project underway that may have drawn some driver’s attention. According to Pennsylvania Turnpike Commission officials, construction is underway on a $270M total reconstruction and widening of two miles of the Turnpike’s east-west mainline (Interstate 76) between Milepost 12 and Milepost 14 in Beaver County that will include new interchange at the Exit 13 Beaver Valley (Beaver Falls/Ellwood City) exit. Upon completion in late 2027, the existing four-lane roadway and bridge will be upgraded to include six 12′ travel lanes, three eastbound and…